Hi,
i fixed the problem with putting the sensor closser (had to machine it to be able to do that.)
the first theet after the missing 2, is not on the same dept.
Die Suche ergab 17 Treffer
- Fr Nov 13, 2015 6:10 pm
- Forum: MegaSquirt 'n Spark / MSExtra / MS2Extra
- Thema: Pickup signal problems,
- Antworten: 8
- Zugriffe: 8297
- Mi Sep 23, 2015 9:47 pm
- Forum: MegaSquirt 'n Spark / MSExtra / MS2Extra
- Thema: Pickup signal problems,
- Antworten: 8
- Zugriffe: 8297
Re: Pickup signal problems,
Hi,
no idea original saab, so shouldn't be that much. 0.4-0.6mm i think. would need to take oil sump off to measure.
no idea original saab, so shouldn't be that much. 0.4-0.6mm i think. would need to take oil sump off to measure.
- Mi Sep 23, 2015 6:34 pm
- Forum: MegaSquirt 'n Spark / MSExtra / MS2Extra
- Thema: Pickup signal problems,
- Antworten: 8
- Zugriffe: 8297
Re: Pickup signal problems,
Hi,
yes, and it gives the red bars when it loses sync.
can't make more of it. but the trigger signal is to low in amplitude when i compare with all the other cars here.
and the first tooth after the missing tooth is a problem i think. but wanted to get somebody else is look on this .
yes, and it gives the red bars when it loses sync.
can't make more of it. but the trigger signal is to low in amplitude when i compare with all the other cars here.
and the first tooth after the missing tooth is a problem i think. but wanted to get somebody else is look on this .
- Mi Sep 23, 2015 5:48 pm
- Forum: MegaSquirt 'n Spark / MSExtra / MS2Extra
- Thema: Pickup signal problems,
- Antworten: 8
- Zugriffe: 8297
Re: Pickup signal problems,
Alfagta hat geschrieben:Hello,
which type of ms do you have? (board version)
Best Regards
Hi, its a KDFI basic board latest version.
but changed it out with other ecu's and same faults. but i you look at the signal, after the missing thoot, its going up, and doesnt go through the 0 volt line.
- Mi Sep 23, 2015 2:58 pm
- Forum: MegaSquirt 'n Spark / MSExtra / MS2Extra
- Thema: Pickup signal problems,
- Antworten: 8
- Zugriffe: 8297
Pickup signal problems,
Hi, i have a saab 9-5 with original pickup sensor and wheel on the crank. its a 60-2 pickup. but i am getting a strange signal, so the engine wont rev past 2000 and losses sync. rpm go's from 2400 - 0 and back. attacht scoop image. i think the wheel in the engine is not good. but that almost impossi...
- Fr Sep 04, 2015 5:22 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Hi Pieter, so on one board the sensor works and on the other three it doesn't? Connections seem to be OK. Resistances too. Maybe there is an error on the board? Hi, thanks, yes, i have had 1 bmw ecu that works, 1 kdfi cinch that works, first order. 4 KDFI cinch that wideband doesn't work, all order...
- Do Sep 03, 2015 12:49 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Hi Pieter, the CJ125 throws the error "240". "255" means everything is OK, everything else means nothing good :roll: The error in your case should be a shortcircuit to ground on the sensorlines "Virtual Ground" (yellow) and "Nernstvoltage" (black). Please che...
- Di Sep 01, 2015 9:25 am
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
I did some measurements and there is no short circuit between any of the pins and the GND. switched the daughter-board on to a basisc Circuit board. same problem. so problem is in the daughter board. there has to be short or open circuit.... but i don't have a lay out of the KDFI, so there it ends.....
- Mo Aug 31, 2015 8:23 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Hi Sebastian, thanks for helping out, i will check tomorrow , i have a M50Tu engine running with KDFI plug in ecu, everything working. and 3 chinch that don't work.Bastigb10 hat geschrieben:Hi ....
Best Regards
Sebastian
will measure out the cinch board first. then check the rest.
- Mo Aug 31, 2015 2:13 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Hi,
i got the Circuit in today for USB to Serieel TTL,
works great !
But now....
when i press connect it keeps rolling in data...
see this movie :
https://www.youtube.com/watch?v=A2c1CW3snvc
i got the Circuit in today for USB to Serieel TTL,
works great !
But now....
when i press connect it keeps rolling in data...
see this movie :
https://www.youtube.com/watch?v=A2c1CW3snvc
- Do Aug 27, 2015 9:19 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
i had the cable correct. everything is good. so we will see tomorrow when i got the converterAlfagta hat geschrieben:Yes that convertor will work.
You have the cable correct now and same issue?
hopefully i can read it out correct.
tested 3 other daughterboard of cars i had around the shop. all the same.
- Do Aug 27, 2015 1:33 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Can i use one of these ?
usb to serieel TTL ?
https://www.antratek.nl/adapters/usb/usb-ttl-serieel
already bought these :
https://www.antratek.nl/ftdi-basic-breakout-5v
but next time i would go for this board TTL-232R-5V-PCB from FTDI
usb to serieel TTL ?
https://www.antratek.nl/adapters/usb/usb-ttl-serieel
already bought these :
https://www.antratek.nl/ftdi-basic-breakout-5v
but next time i would go for this board TTL-232R-5V-PCB from FTDI
- Do Aug 27, 2015 1:31 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
Yes, you would also need a TTL<->RS232 adapter because the rxd and txd pins have TTL level. How is your LSU4.2 connected to the kdfi? Colors and Pins at the LSU 4.2 connector Black - Pin 1 Green - Pin 2 Grey - Pin 3 White - Pin 4 Yellow - Pin 5 Red - Pin 6 so there is a green cable.... The green ca...
- Do Aug 27, 2015 12:07 pm
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
yes.Alfagta hat geschrieben:Are the dip switches 5 and 6 at the on position?
Did you look at video ?
- Do Aug 27, 2015 11:15 am
- Forum: Breitband Lambdameter
- Thema: KDFI Wideband lambda Red led flashing Fault
- Antworten: 17
- Zugriffe: 17272
Re: KDFI Wideband lambda Red led flashing Fault
KDFI 1.4 cinch, i got a basic board as well.
Can i use a RS232 to usb cable ? and what wire needs to what pin ?
like this Pin 2 RXD Pin 3 TXD Pin 5 GND ?
Can't get the communication to work...
i can read or write a word german.. Sorry
Can i use a RS232 to usb cable ? and what wire needs to what pin ?
like this Pin 2 RXD Pin 3 TXD Pin 5 GND ?
Can't get the communication to work...
i can read or write a word german.. Sorry